FS Parts: Four WG k7000 chassis (1 working, 1 complete non-working, 2 for parts)

fcjim

Well-known member
Joined
Jan 11, 2013
Messages
2,929
Reaction score
1,099
Location
Fort Collins, Colorado
Rating - 100%
50   0   0
Four WG k7000 chassis (1 working, 1 complete non-working, 2 for parts)

I have four Wells Gardner k7000 chassis for sale. Two are the 447 pcb (19") and two are the 538 (25").

#1 (upper left): 25" k7000. Tested working, but with some horizontal size/linearity issues I haven't been able to sort out. It originally had a narrow pic that couldn't be adjusted enough with the width coil, so I replaced the width cap with a different value and that's when I noticed that the pcb had a little hole burned through where the cap was attached. I also noticed it runs a bit hot, so even though this chassis works it may still need further repair. Even though it has the adjustment pots mounted to the board itself (i.e. no remote board) this is the 538 pcb.

#2 (upper right) 19" k7000. Does not work but appears to be complete. B+ was measured at 175v, I haven't done any more troubleshooting on it beyond that.

#3 (lower left): 25" k7000: Parts chassis, no flyback. Looks like most of the useful pieces have already been salvaged, including width coil.

#4 (lower right) 19" k7000: Parts chassis, no flyback. A few parts have been removed but still plenty of useful parts here.

All yours for $85 shipped (USA). Pics to follow. Thanks!
 

Attachments

  • IMG_3427.jpg
    IMG_3427.jpg
    574.7 KB · Views: 43
Last edited:
Pics of the working 25" chassis. Convergence pic shows the linearity issue that I can't adjust out... it may be an issue with this yoke, not sure.
 

Attachments

  • IMG_3421.jpg
    IMG_3421.jpg
    546.3 KB · Views: 26
  • IMG_3422.jpg
    IMG_3422.jpg
    526.6 KB · Views: 25
  • IMG_3417.jpg
    IMG_3417.jpg
    529.8 KB · Views: 37
  • IMG_3418.jpg
    IMG_3418.jpg
    590.6 KB · Views: 35
Pics of other three chassis.

Pic 1 is chassis 2, the complete but non-working 19"
Pic 2 is the 25" parts chassis
Pic 3 is the 19" parts chassis
 

Attachments

  • IMG_3423.jpg
    IMG_3423.jpg
    565.5 KB · Views: 22
  • IMG_3424.jpg
    IMG_3424.jpg
    570.9 KB · Views: 22
  • IMG_3426.jpg
    IMG_3426.jpg
    557.4 KB · Views: 19
Back
Top Bottom