Four Board Q*bert PCB set with 10 in 1 Multi-Q*bert Kit installed
For Sale: <<NO LONGER FOR SALE>>
Four Board Q*bert PCB set with 10 in 1 Multi-Q*bert Kit installed
This boardset has been repaired, refurbished, tested and ready for installation.
Main Board:
· All socketed ICs have been removed, legs cleaned and re-inserted
· The blue jumpers have been bypassed on the solder side of the board – these tend to oxidize and lose contact causing intermittent graphics problems
· The power-on reset capacitor value was increased to 470uF for stability
· Mike Doyle's 10 in 1 Multi-Q*bert kit installed. Read about it here:
http://revengeofthenerdsv.blogspot.com/2011/12/grand-finale.html
Speech Board:
· All socketed ICs have been removed, legs cleaned and re-inserted
· Mike Doyle 10 in 1 Multi-Q*bert kit speech portion installed
· New LM379S amplifier and larger finned heat sink installed
Filter Board:
· All KK headers have been replaced to insure reliable connections.
Power Supply Board:
· Completely recapped and refurbished using all recommended upgrades for reliability
· In addition, all KK headers have been replaced to insure reliable connections
A lot of time and attention has been put into this set incorporating all recommended upgrades and additionally the replacement of all KK headers.
[FONT="]$600 shipped or best offer. << SOLD>>
Thank you,
Bill
[/FONT]



[FONT="]
[/FONT]
For Sale: <<NO LONGER FOR SALE>>
Four Board Q*bert PCB set with 10 in 1 Multi-Q*bert Kit installed
This boardset has been repaired, refurbished, tested and ready for installation.
Main Board:
· All socketed ICs have been removed, legs cleaned and re-inserted
· The blue jumpers have been bypassed on the solder side of the board – these tend to oxidize and lose contact causing intermittent graphics problems
· The power-on reset capacitor value was increased to 470uF for stability
· Mike Doyle's 10 in 1 Multi-Q*bert kit installed. Read about it here:
http://revengeofthenerdsv.blogspot.com/2011/12/grand-finale.html
Speech Board:
· All socketed ICs have been removed, legs cleaned and re-inserted
· Mike Doyle 10 in 1 Multi-Q*bert kit speech portion installed
· New LM379S amplifier and larger finned heat sink installed
Filter Board:
· All KK headers have been replaced to insure reliable connections.
Power Supply Board:
· Completely recapped and refurbished using all recommended upgrades for reliability
· In addition, all KK headers have been replaced to insure reliable connections
A lot of time and attention has been put into this set incorporating all recommended upgrades and additionally the replacement of all KK headers.
[FONT="]$600 shipped or best offer. << SOLD>>
Thank you,
Bill
[/FONT]



[FONT="] [/FONT]
Last edited:


