Forgotten Worlds PCB

UFO Sighting

Member
Joined
Jun 14, 2025
Messages
30
Reaction score
8
Rating - 0%
0   0   0
Hi guys,

I'm still a learner around an arcade, but am keen on FW and was offered as claimed as follows:

"100% original jamma board super rare like new conditions super clean, low serial number 00673 tested works perfectly"

Could you please tell me how much you think this PCB is worth? Also, how hard would it be to find a "C Board" as it does not come with one?

Futhermore, would this have any issue connecting to Hursit's spinners?

I've also attached some photos of the PCB.

Cheers.
 

Attachments

  • 487409282_1111231980808587_1902372247437663864_n (1).jpg
    487409282_1111231980808587_1902372247437663864_n (1).jpg
    226 KB · Views: 13
  • 487463098_1111231990808586_5331021849966534421_n.jpg
    487463098_1111231990808586_5331021849966534421_n.jpg
    193 KB · Views: 11
  • 487440356_1111232270808558_7059526574944216985_n.jpg
    487440356_1111232270808558_7059526574944216985_n.jpg
    242.9 KB · Views: 10
  • 487421166_1111232174141901_6919273052266043233_n.jpg
    487421166_1111232174141901_6919273052266043233_n.jpg
    208.8 KB · Views: 11
  • 487861490_1111231974141921_2290522083533294358_n.jpg
    487861490_1111231974141921_2290522083533294358_n.jpg
    137.3 KB · Views: 13
That board is complete, it does not need a "C" board. I paid $800 6 months ago and $1200 2 years ago for the 2 that I have. The Hursit spinners work just fine with those boards.
 
Saw a board go for around 275 not very long ago. And the cost's mentioned above are what I paid for the whole game about a year ago.
I don't think the board is worth any where 800$
 
Saw a board go for around 275 not very long ago. And the cost's mentioned above are what I paid for the whole game about a year ago.
I don't think the board is worth any where 800$

That board is complete, it does not need a "C" board. I paid $800 6 months ago and $1200 2 years ago for the 2 that I have. The Hursit spinners work just fine with those boards.

Thank you both. This is great info. If either of you decide to let go of your FW PCB's please let me know.
 
Back
Top Bottom