SOLD - PARTS Foodfight stick white

DuaneHawley

Well-known member

Donor 2013
Joined
May 16, 2013
Messages
1,995
Reaction score
130
Rating - 100%
29   0   0
This is my foodfight prototype stick I made developing the billet inserts to replace the balls that wear so quickly. I was saving it for another foodfight project but have decided to let it go. It has the best parts I was able to collect over the years, most of them are NOS. the bellows is a NOS bellows I installed and used the stick only a few times to test the bearing system. The white sticks are stronger than the black plastics.
$520 shipped as shown with the billet bearing stick.
Thanks,
Duane
 

Attachments

  • Foodfight stick last one2.jpg
    Foodfight stick last one2.jpg
    524 KB · Views: 102
  • Foodfight stick last one1.jpg
    Foodfight stick last one1.jpg
    522.7 KB · Views: 75
Last edited:
and I have everything else needed to complete it, everything....
 
As someone who pieced together multiple sticks recently I can tell you Daune's price is quite fair :). And FWIW his bearing stick eliminates the slight slop in the stick vs the normal pivot ball and should eliminate the need to ever replace the two housing pieces and obviously the pivot ball.

GLWTS and congrats to the buyer :001_scool:
 
As someone who pieced together multiple sticks recently I can tell you Daune's price is quite fair :). And FWIW his bearing stick eliminates the slight slop in the stick vs the normal pivot ball and should eliminate the need to ever replace the two housing pieces and obviously the pivot ball.

GLWTS and congrats to the buyer :001_scool:

Thank you for the response on the parts they should last forever! Glad to hear from you sir
 
Back
Top Bottom