Food Fight Questions

flynn54321

Well-known member
Joined
Jan 13, 2008
Messages
6,244
Reaction score
176
Location
GREEN BAY, Wisconsin
I have a few questions regarding the wiring on my Food Fight. My cabinet was converted to another game and I am in the process of converting it back.
The wiring harness that I got for it has been cut in a few places and I just need to make sure I have everything going where it is supposed to.

#1 Does anyone know what the pinout is for the control panel player 1 and 2 buttons?
Off of the board edge connector I have a few wires... player 1 start, player 1 light, player 2 start, and player 2 light.
On the cone lights there are 4 wires going into each switch. The red and the black I have figured out - but I have no idea which of the two remaining is the start and which is for the light. Can anyone help?

#2 Does anyone have a picture of the inside of the coin door? My panel inside has a volume control, counter and a test switch... wires have been cut to these things - so I guess I need to know what color wires go where and what controls are on that panel.

#3 Any help with coin door wire pin outs would be helpful. Again I am just trying to put this baby together...
Any pics or help would be appreciated.
 
i've got the same problem - except i have the green/white/black power harness intact, and the rest is missing!
 
Found a schematic online that will probably help with some of it - but I still have questions on some of the wires... why do ppl have to cut these instead of just unplugging the connector???
 
Back
Top Bottom