FO/FS G07-Chassis, Ms. Pac PCB (non-working, MTPO PC-10 (non-working)

smeagolsama

New member
Joined
Mar 20, 2011
Messages
71
Reaction score
1
Location
Missouri
Rating - 100%
5   0   0
FO/FS G07-Chassis, Ms. Pac PCB (non-working, MTPO PC-10 (non-working)

I've got the following for offer or for sale if you want to make offers. If you want to trade I'm looking for Playchoice 10 pcbs that are working (pm for a list), Nintendo arcade parts (Popeye, Radar Scope, Etc, Especially marquees to the older stuff like Heli Fire, Space Firebird), and I'm also interested in a DK II Kit (chip w/high score save kit, marquee, bezel, etc).

If interested I know as this isn't great stuff I've got for offer I can add paypal as necessary.

This lot won't be split up as its I'm selling it all as non-working and would like to get it out to somebody that could bring them back. I don't think there is anything severely wrong with any of it otherwise I'd have thrown it away. If only interested in one item make an offer based on that item, you might be surprised.

Electrohome - G07 Chassis, Looks to have been rebuilt. It worked intermittently up to 30 seconds at a time. Should be rebuilt again, or at least needs a new horizontal coil. I found one cold solder joint when looking at it. Also had 120 V coming from the power supply but the monitor didn't have power all the time, hence the intermittent problem (hot problem?).

Ms. Pac Man PCB - Loads but the screen is garbled. Pictures included below, non-playchoice picture. Research I did indicated it to be a problem with the E row of chips.

Mike Tyson's Punchout - Bought here untested and it shows :p. Should just need a new rom chip. The ID chip should be good as it shows up in the list, and instructions work fine. When I load the rom it garbles it all up.
 

Attachments

  • 09ED1B3B-ABBC-A8E7-764E738F3284E08C.jpg
    09ED1B3B-ABBC-A8E7-764E738F3284E08C.jpg
    24.7 KB · Views: 21
  • D8A55607-F16A-A639-FEC23C7D4E3F8B4C.jpg
    D8A55607-F16A-A639-FEC23C7D4E3F8B4C.jpg
    11.2 KB · Views: 21
Not sure what to price this stuff at actually? Maybe 50 dollars plus actual shipping price for the 3 pieces? Fixing one piece should pay for the lot then you have 2 other pieces to profit on?
 
Lets try 40 dollars plus actual shipping on the for all 3 pieces. That way i could still buy a project marquee/bezel, or few parts.
 
Back
Top Bottom