SOLD - PARTS Flat tip for HV probe

jacklick

Well-known member

Donor 9 years: 2013, 2016-2021, 2023-2024
Joined
Feb 11, 2013
Messages
6,890
Reaction score
2,640
Location
Aldie, Virginia
Rating - 100%
46   0   0
Free + shipping/handling :) Figure a few dollars for small bubble mailer and shipping.

I only needed one and maybe a spare. So have 8 available.

Cal Test Electronics CT2962A High Voltage Probe Replacement 5mm Threaded Flat Bar Tip

I use it on my probe here.
https://youtu.be/43Vqg_Uxths?t=12m1s
 

Attachments

  • probetipJPG.JPG
    probetipJPG.JPG
    94.4 KB · Views: 140
Last edited:
i'm interested, but only if it'll work with my beckman hv-211 probe:

456076.jpg


plz let me know! thanks.
 
i'm interested, but only if it'll work with my beckman hv-211 probe:

456076.jpg


plz let me know! thanks.

So it comes with a 5mm nut so is designed to go on a probe with 5mm probe tip thread, I guess, but beats me which probe have what thread size. My probe's tip (probably others) thread is smaller @ 3mm so I just used the cone tip I had to screw/hold down this flat tip and it worked fine. At the most you may need a couple small washers and a nut.

I'll take one.
Pm sent.

I have you and one other down for one. So 6 left. Give me a day or to get correct packing and work out shipping.
 
Count me in if it fits the Beckman probe shown above as that is the exact one I use! And THANKS for putting up the post to share the parts. Looks like a useful tip for those stubborn anode cups...
 
Ok, I will call these sold for now. Below are the users that expressed interest. Give me till Friday to get them packed up and send you all shipping instructions.

JRudebaugh
Shawn1976
accuratemold
alexred
thegleek
alan173
nkowalskiw
 
Back
Top Bottom