Flash pinball sound

dyermaker

New member
Joined
Aug 22, 2008
Messages
19
Reaction score
0
Location
Taylor, Michigan
I Have a nice flash pin I am bringing back to life and I have a sound issue
I didn't have any sound and after checking everything I needed a board
I installed a new (used) sound board and bingo I have game sound no background sound so I changed the settings factory is off but no luck.
I changed a few more game play settings and got background sound but game would only allow 1 ball per game. I tried to get the game back to 3 ball game but with no luck
Ok I said to self, factory reset! Now I am back to game sound with no background
My doc shows option 33 as sound 00 being off 01 being on
Does any one know different?
 
That's what I figured.

System 6 settings are a little different, took be a bit to find it again. With the System 6 ROM's it's actually setting #31 that controls the background sound, not setting #33.

-Hans
 
No it's different. I was hoping for that also Gorgar shows 31 as out lane control and 35 being the background sound. Flash s6 adj#31is the sound. Going to keep searching cyber land it's got to be out there somewhere
 
Yea they are not listed as they should in the IPDB manual. Only a few of them are incorrect. I do have them figured out. I have the list at home. I will post it this evening.
 
IIRC there weren't many changes in the settings, and an addendum sheet WAS published that described the changes. I just can't find it.

-Hans

Edit: Found it! It is in IPDB in the flash users manual, the 4mb one, and the last three pages are the system 6 addendum with the new settings list.

-Hans
 
Last edited:
Back
Top Bottom