Fixing a speaker on a Playchoice 10

shane7951

Member
Joined
Jan 26, 2011
Messages
658
Reaction score
3
Location
Arkansas
I have a dual screen dedicated Playchoice 10 and the left speaker sounds great while the right speaker is muffled and doesn't really produce anything other than a low end hum. How could I go about fixing it to where both speakers produce a clear sound?
 
I would try another speaker of the correct impedance. If it works I would buy a matching speaker to fit in there and if it doesn't work, you have a board problem.
 
I would try another speaker of the correct impedance. If it works I would buy a matching speaker to fit in there and if it doesn't work, you have a board problem.

Where could I find the specifications for the speakers used?
 
Sounds like an amp issue but it could be the speaker try swaping speakers to see if the problem moves if not then try swaping the amp. It could also be one of the CPU's on the board and you can swap them too, good luck with the repair.
 
speakers

my pc 10 only has one speaker.(duel screen)

sound all works.

maybe they are run duel speaker mono.

both monitors have an amp board. try switching them to isolate the problem.

chris
 
my pc 10 only has one speaker.(duel screen)

sound all works.

maybe they are run duel speaker mono.

both monitors have an amp board. try switching them to isolate the problem.

chris

Are there instructions for that? I'm used to working on computers so I'm new with this and don't want to screw it up.

By the way, Cousin Eddie is my hero! You serious Clark? ;)
 
Back
Top Bottom