Fixed up my 2nd game

philsarcade

Member

Donor 2012, 2025
Joined
Mar 24, 2012
Messages
127
Reaction score
7
Location
Fresno, California
I still need to wire the inside, but I finished the exterior. It was a trashed single slot neo-geo conversion.
I started this hobby 3 months ago. I know little, but I loved these games growing up, so I'm trying hard.
I was born in 1980, so this game came out when I was 10.
 

Attachments

  • fffdfdff2.JPG
    fffdfdff2.JPG
    17 KB · Views: 89
  • fdfdfdfff2.JPG
    fdfdfdfff2.JPG
    18 KB · Views: 132
JumbleJunkie

Thank you to JumbleJunkie for his online videos of fixing up a Wrestle War machine. It helped me out a lot!!
 
Nice looking game. Have not played that game, but if the game plays as good as it looks it will be sweet!
 
I have a question......

I'm trying to wire this machine......the speaker works for sure because they worked with the last game in this cabinet. The Wrestle War manual says that the jamma pinout calls for pin 10 to be speaker wires. I tried hooking the wires (black/white) straight up to the speaker in the cabinet. No sound came out when I turned the machine on. Do I hook the wires from the jamma harness straight to the speakers or to a component, that then gets connected to the speakers.....almost like an amp in a car?
 
In most cases with jamma its right to the speaker. Check your power supply for the -5v feed, that usually runs the audio on a lot of jamma boards.
 
Back
Top Bottom