First timer repair question

mochaman

Active member
Joined
Feb 10, 2012
Messages
898
Reaction score
35
I am attempting to revive a G07 monitor. I was wondering if my monitor PCB has been modified. I have included 2 pics with circled spots and a full view. Are these supposed to be here? If you see any other problem, any help is appreciated. Thanks Sorry if pics are too blurry. Can try to get better pics if that'll help.
 

Attachments

  • DSC_0117.jpg
    DSC_0117.jpg
    102.4 KB · Views: 28
  • DSC_0118.jpg
    DSC_0118.jpg
    98.4 KB · Views: 30
  • DSC_0119.jpg
    DSC_0119.jpg
    103.1 KB · Views: 25
Good to hear. Now I can start my deluxe repair kit install.
 
Another question

I am done recapping PCB's. I forgot (didn't document it) where the wire from metal strap on tube goes to. Pic is added. This is last thing before I try it out, fingers crossed.
 

Attachments

  • photo-1.jpg
    photo-1.jpg
    108 KB · Views: 7
there are two places on the neck board one on the upper part of the neck board and one on the lower side close to the chassis.

connect it to the lower one on the neck board closest to the chassis.

Peace
Buffett
 
Nothing. Blew fuse f901 immediately. Now I'm stumped. What would blow this fuse? Cabinet has some original power pieces and a switcher. Should I change all this to new? Get rid of old things?
 

Attachments

  • photo.jpg
    photo.jpg
    97.2 KB · Views: 2
Last edited:
Back
Top Bottom