First attempt at making a 6100 extension

MannyTC

Member

Donor 2016-2017
Joined
May 2, 2016
Messages
96
Reaction score
1
Location
Peoria, Arizona
I have been finishing up the rebuild of the 6100 chassis in my Star Wars as well as repairs to the game pcbs. I wanted to test everything with the monitor outside of the cab so I decided to try and make one. It's not very pretty but is does the job. I used 14awg wire for the 3 power wires and 18awg wire for everything else. Total material cost to make the 3' cable was under $5.
 

Attachments

  • Monitor Extension Cable.jpg
    Monitor Extension Cable.jpg
    512.3 KB · Views: 39
I have been finishing up the rebuild of the 6100 chassis in my Star Wars as well as repairs to the game pcbs. I wanted to test everything with the monitor outside of the cab so I decided to try and make one. It's not very pretty but is does the job. I used 14awg wire for the 3 power wires and 18awg wire for everything else. Total material cost to make the 3' cable was under $5.

Very nice!
 
Nice. I like that the signal pairs are twisted. Here's a picture of the one I made:
 

Attachments

  • IMG_4810.jpg
    IMG_4810.jpg
    790.6 KB · Views: 19
Back
Top Bottom