Firepower II blues... Again..

89pin

New member
Joined
Feb 16, 2010
Messages
53
Reaction score
1
Location
Wayne, New Jersey
I have a williams firepower II machine that was working great untill it sat. Boots up and goes right into attract mode no problem. Registers coins, both balls are in it. Go to push the start button and nothing happens. Connectors?? Any way to "jump it" into play? Any help is great. Thanks.
 
I have a williams firepower II machine that was working great untill it sat. Boots up and goes right into attract mode no problem. Registers coins, both balls are in it. Go to push the start button and nothing happens. Connectors?? Any way to "jump it" into play? Any help is great. Thanks.

Did you run a switch test to see if both balls trough switches are registering?

-Hans
 
Did you run a switch test to see if both balls trough switches are registering?

-Hans

Yes I did. The credit button (button 3) dose not seem to be apearing in the test. Button tested good as well as the wiring going to the driver board.
 
Got it. The contact points were dirty on the switch. cleaned that and the rest of the contacts. Thank you for the help. "see what happends when you look past your nose.."
 
Back
Top Bottom