Museum of the Game® & International Arcade Museum® Forums

Hi All,

I have a Firepower that isn't booting up at the moment. When powering on, both LED's on the MPU stay lit without flashing. From the write up on pinball.flippers.info, I removed the solenoid fuse and disconnected the Driver board and still got locked on LED's without a flash. From what I understand, this narrows it down to the MPU board.

I'm assuming my next step is to use Leon's test ROM. Since I don't have access to a ROM burner, can someone make any recommendations on where to purchase Leon's test ROM?

Also, while I've got the board out it seems like a good time to replace all the connectors and sockets since it's never been done. Any recommendations on where there are available?

If there is anything else I can do in the meantime, or other work I should do to the board while its out, please let me know