fire power ball in play display out ( got this working )

steffan

Member
Joined
Nov 11, 2015
Messages
64
Reaction score
2
Location
new britain, Connecticut
hello, thanks for reading this. I have a Williams firepower where the ball in play went out. i swapped the master display with a working one from a gorgar pinball. this did not fix the issue. eventually due to some displays not working in gorgar or firepower i swaped the firepower displays over to a xpin display system. this also did not fix the ball in play (strobe 8 according to a diagram i downloaded) I had the MPU and driver board recently repaired. this also did not fix the issue. I believe that this would most likely be a bad wire or connector. I do not have proper tools to test this but would like your expert advice. I am also willing to pay for repair service. I live in New Britain Ct.. thanks again for reading this. [email protected]
 
Last edited:
Back
Top Bottom