Museum of the Game® & International Arcade Museum® Forums

For some reason my board did not have a cap in C202. APAR's instructions call for a 220UF @ 50v cap there on the 20EZ and in the manual for the 14" it calls for it as well.

Also, APR's instructions call for a 100UF @ 50v cap at C201. Is this just for the 19" 20EZ? Or does this apply to the 14" version as well? For some reason, mine had a 220UF @ 16v cap in there. Should I go ahead and install the cap that APAR recommends?

Other than that, the rest of the caps are fine. Only different one was that C410 47UF @ 250v cap that APAR sent me.

Any advice would be appreciated.

Thanks,
Jason
Back
Top Bottom