Fellow Warlorders with a 14” Sanyo EZZ…cap location question

Yoeddy

Well-known member

Donor 2021
Joined
Feb 5, 2010
Messages
3,121
Reaction score
2,288
Location
Boise, Idaho
For some reason my board did not have a cap in C202. APAR's instructions call for a 220UF @ 50v cap there on the 20EZ and in the manual for the 14" it calls for it as well.

Also, APR's instructions call for a 100UF @ 50v cap at C201. Is this just for the 19" 20EZ? Or does this apply to the 14" version as well? For some reason, mine had a 220UF @ 16v cap in there. Should I go ahead and install the cap that APAR recommends?

Other than that, the rest of the caps are fine. Only different one was that C410 47UF @ 250v cap that APAR sent me.

Any advice would be appreciated.

Thanks,
Jason
 
Back
Top Bottom