Maverick1978
New member
Hi folks. I recently acquired one of these, complete and untested. It has a Wells D9200 in it, and includes the dongle on the pc. Cabinet is rough with some water damage. Metal accoutrements on the seat need sanding and painting. Needs new t moulding and a good clean on the cp, perhaps even a new cpo.
Water damage is on right bottom of the monitor end of the cab, it's separated a bit. Should be glueable with a clamp. Artwork is not damaged. Left bottom of monitor end has swollen up a bit. Doesn't affect artwork. T-molding is missing here. Not shown in pix, unfortunately.
Please see pix, would appreciate your input. There doesn't seem to be a lot of info out on this machine regarding value.
https://klovimg.com/image/LmuOl
https://klovimg.com/image/LmCEi
https://klovimg.com/image/LmDWE
https://klovimg.com/image/LmNtQ
https://klovimg.com/image/LmxLr
Water damage is on right bottom of the monitor end of the cab, it's separated a bit. Should be glueable with a clamp. Artwork is not damaged. Left bottom of monitor end has swollen up a bit. Doesn't affect artwork. T-molding is missing here. Not shown in pix, unfortunately.
Please see pix, would appreciate your input. There doesn't seem to be a lot of info out on this machine regarding value.
https://klovimg.com/image/LmuOl
https://klovimg.com/image/LmCEi
https://klovimg.com/image/LmDWE
https://klovimg.com/image/LmNtQ
https://klovimg.com/image/LmxLr