F/T Williams Boards, Tektronix & Data I/O Stuff

Thomas

Well-known member

Donor 2021
Joined
Jan 23, 2009
Messages
3,726
Reaction score
75
Location
Virginia
Rating - 100%
61   0   0
F/T Williams Boards, Tektronix & Data I/O Stuff

For Trade or Sale

I have some snaps up not much yet. I keep opening up boxes and finding more stuff to sell.

http://arcadeparts.org/parts

-----
Games Family KE/TE P4 2.4, 512mb - New In Box Never Used. Should be still under warranty from Nix's. The 2 hard drive's I have are old as hell, that's the way I got them and I don't trust them. You have been warned! - Bryan/Armi sells the new 2125 drives anyway. I can also throw in a P2.8 I bought for it. 200.00 Plus Shipping. That's 100.00 off and the best I am gonna do. You can ghost both the hard drives I have and install the OS and games on new drives. I wonder why I half to go thru this shit with the hard drives.

Midway Full Size Cab - NBA Jam No Art - Solid Project No Water Damage - W/NBA Jam Control Panel $100.00
NBA Jam Harness, Some not all ?
NBA Jam Power Supply / ISO ?
Polo 25' Monitor With Slight Burn - Told Works Fine But Will Test To Be Sure. $100.00 Pick up only

New J-Pac Never Used - I was building a really nice hyperspin system and lost interest. $50.00 Shipped

New K7000 25' Flyback
3 K7000 Chassis - 19' NON WORKING
3 K7000 Chassis - 25' NON WORKING $75.00 Plus Shipping on all this Wells Gardner stuff.

Matsushita TM 202G 20 Inch Monitor - Non working but very clean tube & chassis. Fried something one night crushing PP $100.00

Missile Command Control Panel - Not too bad 8.5 maybe a 9? $65.00 plus shipping
Missile Command Trackball - Needs Cleaning / Rebuilt. $40.00 plus shipping

9 AR2 Boards - But Need To ID - NON WORKING ?

Stargate Complete Board Set With Both Plates Fully Populated - Widget Board Needs Work, Ah Hell The Sound Too
New Stargate Full Repro Harness By Dokert with Revision 1 Kit
New Stargate Control Panel Harness by Dokert
New Stargate Switcher Harness by Dokert
Stargate Control Panel with A/S overlay that cracked up a little on me when I put it down
Stargate Control Panel, Hacked
Stargate Control Panel, Ala Swish Cheese
Stargate Marquee x 2?
Stargate Bezel x 2?

Robotron Control Panel, A little hacked 2 extra holes?
Robotron Joystick Plates
New Robotron Control Panel Harness by Dokert

3 Williams Power Supplies - Stargate, Robotron, Joust Ect - NON WORKING
1 Williams Sound Board - NON WORKING
2 Williams Widget Boards - NON WORKING
1 Williams Heatsink
1 Williams Power Supply Board / With Heatsink - NON WORKING
1 Williams Main Board Plate
1 Williams Power Supply Plate

Pac 4n1 Main Board - Working - Brand New Components With High Score Save $135.00 Plus Shipping ** Pending Deal **
Ms. Pac Main Board - Working No Daughter Card Required $75.00 Plus Shipping
Pac Jr Main Board - Working - $60.00 Plus Shipping
7 Ms. Pac Daughter Boards - ALL NEED WORK ** Spoken For **

Mortal Kombat I - Tested - $75.00
Mortal Kombat I Sound Board - Not Tested $25.00
Mortal Kombat II With Sound - Working Main Board - Sound Not Tested $75.00
No Cables - I will fire these boards up and get rom revisions if interested

SI Deluxe Plastic Moon Back Drop? See picture it does look good. Has slight bend to it. I would guess from the heat of the bulb.

Arch Rivals Jamma Cable Board ** Sold **

Non working: Still taking inventory on these plus the news parts I have for them.
1 Pole Position II CPU Board
1 Pole Position II Video Board
4 Pole Position I CPU Boards
4 Pole Position I Video Boards
Pole 1 Translite
Pole 2 Translite
I think I have enough new eproms and proms to make most of these PP1's into PP2's, Not sure about the custom. I would need to read up again on that part of the changeover.

Arkanoid Board - Working
Arkanoid Spinner - With Circuit Board But Needs The Knob - Working
Arkanoid Marquee

Mega Touch 5? - For Parts - Darn Thing Might Be MT4

Tektronix 2335 Dual Channel 100 Mhz Scope ** Pending Deal **
2 Tek P6120 10:1 Probes
2335 Manuel on CD

Data I/O 29A
UniPak - The First One
GangPak GPD - Ver 8.0
LogicPak 303A - Ver 04, Part# 950-007-004 D
303A-101 H&L Design Adapter
303A-100 Palasm Design Adapter
303A-001 Programming / Testing Adapter
303A-002 Programming / Testing Adapter
351A-070 Socket Adapter
Manuals For All Of Them

Items I Need
-----
Electrohome GO7-CBO 19' Monitor Frames
Electrohome GO7-CBO 19' Yokes
Electrohome GO7-CBO 19' Chassis's
Electrohome GO7-CBO 19' Capped Chassis's
Wells Gardner 4900's 19' Capped Chassis's

Midway Burgertime Bezel, CPO, Marquee & Stencil Set,
Ms. Pac CPO, Marquee & Vinyl Art
MultiWilliams Stargate Stencil Set

Robotron Shafts Used or Repro & CPO
[FONT=Verdana, Arial, Helvetica, sans-serif]VS Nintendo PPU RP2C04-0004
Used 084 Connectors
[/FONT] Missile Command Back Door
Sencore CR70


**Updated** Pictures are not a problem just ask... Until then I am working on it!
 
Last edited:
Man It's going to take a lot of work to get all this stuff sorted and priced. I keep finding more stuff...

Some more pics added.
http://arcadeparts.org/parts/

Did you hang Ms Pac board sets on your wall???

DSCN4800.JPG
 
Hell yea can't be any safer than there. I can keep an eye on them! Plus they look cool as hell when company comes over. You should see my ar2's making tracks up the wall. The look like electric snow shoes!

Seriously tho I ran out of room to put crap. I have a lot of stuff nailed to the walls
 
MsPac Pcb

Yep tested and working fine 75.00 Plus Shipping.
 
Back
Top Bottom