Exidy Mouse Trap Joystick Grommet and Sleeve / Parts joystick

ChompingQuarters

Well-known member
Joined
Oct 18, 2006
Messages
10,196
Reaction score
68
Location
Clinton Township, Michigan
Rating - 100%
58   0   0
Exidy Mouse Trap Joystick Grommet and Sleeve / Parts joystick

Was going to replace this joystick with a Wico but it polished up nicely and the hole pattern is different and would take some work to get it mounted. However, it's a little sloppy. So, I'm wondering where I might find a NOS or nice original grommet (Item 10) and a sleeve (Item 6). If someone has a complete Joystick I might be interested in that.

http://api.ning.com/files/1QC7GTbhb...6pHq9QkWpjMAnBWMk*mv64N/MouseTrapJoystick.jpg
 
Haven't disassembled my mouse trap stick but it looks to be a bally midway stick like in pac, ms pac ect. I'm guessing it is the same and a grommet for one of those style sticks will be what you need. Not 100% sure but it really looks to be the same.
 
Haven't disassembled my mouse trap stick but it looks to be a bally midway stick like in pac, ms pac ect. I'm guessing it is the same and a grommet for one of those style sticks will be what you need. Not 100% sure but it really looks to be the same.

It not a Midway. But a very close copy that you can fully disassemble. I'm wondering if your right that the grommet would fit from a Midway. Will open my Ms. Pac up tonight and look.
 
Ok, measured up my Ms. Pac and Galaga mounting holes and everything matches so I could just use a Wico or a Midway / Pac style Joystick. Which IMO would probably be the best way to go. Anyone have a nice 4 way Wico with a Yellow or another colored ball top other than black? I have a 2 or 3 wico's with 4/8 way restrictors so if you have the restrictor I could use that as well.

http://therealbobroberts.net/bareplate.jpg
 
Back
Top Bottom