Exidy CHEYENNE issues with gun

Kid Raster

Well-known member
Joined
Sep 25, 2006
Messages
762
Reaction score
405
Location
Tulsa, Oklahoma
Hello again team-

Just working on another Exidy situation here, I have most everything sorted on this machine, but the gun constantly fires during play. I disconnected the rifle and powered it on. It still constantly fires.

It is obviously not the cherry switch in the gun, if it still occurred while the gun was disconnected- so- duh? LOL


Any suggestions appreciated- looking for those Exidy guys out there...
 
Check the start button make sure leafs are not touching. Check molex connectors make sure nothing is touching together or spliced together or a ground connected somewhere where it shouldn't be. Other then that it might be a board problem
 
Thanks LuckyMan, I think my next step will be to unplug the entire gun harness from the board and power the machine on to see what happens then. I'll update, and thx

BTW- Nice Machines in your collection man! I've never seen an non-evironmental D.O.T.! (and I have a Castlevania too- I love it so!)

Thanks again
 
Last edited:
Back
Top Bottom