Environmental cruisin USA encoder problem

playpin35

New member

Donor 2011
Joined
Dec 9, 2008
Messages
1,519
Reaction score
8
Location
Jacksonville, Missouri
Figured I would try and see if anyone has had ANY experience with one of these machines. Working on this one for a while, I found and replaced a bad cable from the wheel board to the motion control board. Game has travel up and down now and boots to attract mode, but when your game starts, the body raises and says "X" encoder failure and the body drifts down and stops moving. I found an NOS control board and get the same results with it. The motion cylinders need to be greased as the manual list this as potential cause, but does anyone know of anything els to try? Any help or comments is appreciated!
 
Still trying to get mine to the attract mode. Pleased to hear there's somebody else out there working on one of these.
 
Back
Top Bottom