Museum of the Game® & International Arcade Museum® Forums

Picked up a cabinet for $100 and it has an EM201 monitor. Initially when I turned it on you could hear it turn on but then go off, I thought HV shut down. I took off the chassis and noticed the large filter capacitor had a bad solder joint so I touched it up and put back into the cabinet. Now when I turn it on, I can hear the monitor on but there is no neck glow. Not 100% sure where to check the power on this chassis but when I checked at the big white resistor there is not power showing, both fuses are good on the board. Bad voltage regulator? or HOT ?