Electrohome G05-801 Help

Tenn_pin

New member
Joined
Dec 28, 2008
Messages
101
Reaction score
0
Location
La Vergne, Tennessee
This is my first attempt to repair a Go5. There is no neck glow and F100 was blown. I replaced the fuse and still no glow and the fuse did not blow. Is there a flow chart to look at? Also, I plan to order a cap kit from BR. Is there anything else (like a flyback, transistors, etc.) that I need to order? I hate to order more than what I need, but I hate even worse to order a $2 part and pay $7 in shipping.

Thanks from a CAB,

R
 
This is my first attempt to repair a Go5. There is no neck glow and F100 was blown.
R

No neck glow?...check the fuses in the bottom of the cab (that's where the heater voltage comes from, not the monitor chassis itself). Also, pull all the monitor boards and reflow all the headers...heater voltage goes through a couple of these....plus, there's always cracked solder on these headers.

Edward
 
Back
Top Bottom