Edot Repro Interest

DPtwiz

Well-known member
Joined
Nov 2, 2006
Messages
8,099
Reaction score
621
First off, BIG thanks to Ted (Seawolf) for bringing this to me. He was here to pick up his new cabs and dropped it off. I have a complete (mostly in pieces) water damaged EDOT cabinet, with the back half included. New ones will be made with 8 leg levelers, and joined together with a steel plate on the top and bottom so they can be assembled once in place.

Also, there is some work going on behind the scenes for Art, and all the metal pieces on the game, cabinet would come assembled with all metal brackets, coin door, control panel etc inclued so you won't have to hunt down all these unique pieces. Price is very undetermined, until everything can get worked out with the metal parts. They won't be cheap, they will take a ton of wood, but it will make a few people's grails attainable! Post any thought/interest in this, thanks! BRett
 
Wow, I haven't really ever looked at picking an original up because of the price, but I might have to make a trip to ohio if you manufacture this. Do you have a ballpark that you might charge for the precut pieces unassembled?

Luke
 
not even a ballpark at this point, i haven't had metal parts reproduced before. I just moved it all into the garage. There isn't a ton of metal parts, but i need a control panel, unless it's the same as regular tron. I will do it in a few versions, bare wood, with no hardware, bare wood with all hardware. I may be able to swing a version assembled, all metal parts, and artwork. I am very limited on space. Obviously, the bare wood version would be the cheapest.. at a guess, bare wood somewhere between 6 - 800.00
 
i didn't get to pick up the one from Kevin, it has mr do in it and it's in his collection :(
 
Back
Top Bottom