Dynamo Cut corner CP? for sale

[7146aaron]

Someone was looking for one of these but I cannot remember who. I will sell it for the shipping cost plus a couple bucks for packing materials. So. $15 east of the Mississippi, $20 West of the Mississippi. The person that can link the wanted thread they made for it has dibbs. It was origionaly a Gorilla war I believe.

 

[Wiz]

Hey Aaron, I think it was someone on CoinOp that was looking, but there could have been someone on here or they may have also posted here as well.

 

[7146aaron]

Coinop

Hey Aaron, I think it was someone on CoinOp that was looking, but there could have been someone on here or they may have also posted here as well.

Maybe it was coin op. Hmmm. That site is ok but it is too slow paced. I get more PMs that he gets posts I have learned.

 

[Newfie]

Hi Aaron:

I just want to confirm that it came from a HS-5. If it did, consider it sold. It's just that your control panel looks different than the all the pics I've seen for the 25" CP. The other ones seem to have the bottom and top meet at a sharper angle and a small front edge, where yours seems a little more box shaped.

 

[splattergatz]

ya, i want it too, ya

so if peoples backs' outs. let me know
thanks

 

[YieArKade]

I have a Guerrilla War dedicated cab and the cut corner control panel is different. That one is from something else. I've never seen a Dynamo cut corner panel that is flat in the front like that one. They usually curve down in the front.

Here's a website that shows most of the Dynamo control panels. The one for HS-5 is shown as well.

http://www.drzero.org/videogames/dynamo/

 

[7146aaron]

Ok. I just measured it. Honestly Dynamo cabs are a little new for me. If it is newer than 1986, I usualy dont want any part of it. The overall width is 23 1/2" The bolt spacing on the hinge is 6 1/2" there is 4 bolts on the hinge. Is that fit a Dynamo? The cab it came from had been converted to an\Aero fighters. There were signs that it was a GW before that. It could have started life as anything I guess.

 

[Newfie]

I think yours might fit the HS-1 or HS-2 models, which are a little smaller. Mine would need one that is about 25.5 inches wide.

Thanks just the same.

 

[mrbill2084]

I have one that is pre-punched for the 2 joysitck 3 button configuration for hs1. If someone needs one let me know.

I like the slim style of for forgotten worlds or strider for just simple jamma games.

 

[FrizzleFried]

I can confirm that isn't any Dynamo CP I've ever seen... I currently have a 19" Dynamo cut corner and 25" Dynamo cut corner in the `cade and both have the rounded fronts...and whats with the strange protrusions on each side of that CP?

 

[7146aaron]

CP

I can confirm that isn't any Dynamo CP I've ever seen... I currently have a 19" Dynamo cut corner and 25" Dynamo cut corner in the `cade and both have the rounded fronts...and whats with the strange protrusions on each side of that CP?

That is why the question mark is in the title of the post. I cant look at the cab. It went away a long time ago. The protrusions are where the latches held the CP down.

 

[7146aaron]

PMs

Maybe it was coin op. Hmmm. That site is ok but it is too slow paced. I get more PMs that he gets posts I have learned.

I have had 42 PMs since 3pm. It is 9:17 now. coinopspace has had 7 forum responses today. (3 by me) It is a neat site. He just needs more traffic. I like it here much better. You guys are great.

 

[Black Matrix]

That's not an HS-anything control panel. I can't remember the game, but people love to convert them to Raidens. I think its some kind of vertical football game cab from the 90s but the name escapes me now.

 

[Wiz]

I have had 42 PMs since 3pm. It is 9:17 now. coinopspace has had 7 forum responses today. (3 by me) It is a neat site. He just needs more traffic. I like it here much better. You guys are great.

No worries, I was just saying that I thought there was someone on CoinOp in the last couple of days asking if someone had one for sale. I am sure you will not have a hard time selling it for the price you stated. I have also owned several Dynamo cut corner cabs with the sharper front bend. It seems like I have seen this type of CP on another similar type of conversion cabinet, or perhaps it might fit on a Dynamo Z cabinet, not sure.

 

[mrbill2084]

No worries, I was just saying that I thought there was someone on CoinOp in the last couple of days asking if someone had one for sale. I am sure you will not have a hard time selling it for the price you stated. I have also owned several Dynamo cut corner cabs with the sharper front bend. It seems like I have seen this type of CP on another similar type of conversion cabinet, or perhaps it might fit on a Dynamo Z cabinet, not sure.

leland quaterback..
http://www.arcade-museum.com/game_detail.php?game_id=9191

 

[Les Manley]

Someone was looking for one of these but I cannot remember who. I will sell it for the shipping cost plus a couple bucks for packing materials. So. $15 east of the Mississippi, $20 West of the Mississippi. The person that can link the wanted thread they made for it has dibbs. It was origionaly a Gorilla war I believe.

I was looking for one to replace the trackballed one in my cabinet. I want to turn it into an SF2. Here is my original thread...

http://forums.arcade-museum.com/showthread.php?t=144874&highlight=dynamo+control

 

[Les Manley]

Ok. I just measured it. Honestly Dynamo cabs are a little new for me. If it is newer than 1986, I usualy dont want any part of it. The overall width is 23 1/2" The bolt spacing on the hinge is 6 1/2" there is 4 bolts on the hinge. Is that fit a Dynamo? The cab it came from had been converted to an\Aero fighters. There were signs that it was a GW before that. It could have started life as anything I guess.

23.5 is the width of my control panel on my Dynamo cabinet. It was originally a Double Dragon 2 before someone converted it to Krazy Bowl...

 

[marcmdm2005]

Can I get some measurements?

 

[7146aaron]

Measurements

Can I get some measurements?

Ok. I just measured it. Honestly Dynamo cabs are a little new for me. If it is newer than 1986, I usualy dont want any part of it. The overall width is 23 1/2" The bolt spacing on the hinge is 6 1/2" there is 4 bolts on the hinge. Is that fit a Dynamo? The cab it came from had been converted to an\Aero fighters. There were signs that it was a GW before that. It could have started life as anything I guess.

What other measurements do you need?