Dual jamma power supply?

FlashbaxArcade

Active member
Joined
Jun 2, 2009
Messages
1,521
Reaction score
11
Location
Burleson, Texas
should a 150W power supply from Betson be sufficient in a dual boot to power both a GT '05 and Silver Strike Bowling boardsets?

thanks
 
maybe there is something I don't know about those boards but even with a dual jamma set up I think you still just want to run 110-120V I would think more than that would likely cause damage to your boards. Unless you have some sort of regulator that is allowing 150v in then stepping it down to 110-120 for each of 2 switching PS's. Like I said there may be something I don't know about these boards though.
 
maybe there is something I don't know about those boards but even with a dual jamma set up I think you still just want to run 110-120V I would think more than that would likely cause damage to your boards. Unless you have some sort of regulator that is allowing 150v in then stepping it down to 110-120 for each of 2 switching PS's. Like I said there may be something I don't know about these boards though.

150 watts, not volts. ;)
 
what he said! i know the installation instructions say to use no less than 120W, but don't know if that is good for 2 pc/HDD driven games like Silver Strike and GT?
 
Back
Top Bottom