Museum of the Game® & International Arcade Museum® Forums

I have a dual Daytona USA that has always been a bit finicky but always worked. Sometimes only one side would turn on and I'd have to power cycle the unit to get both to boot up. But it was like that for 12 years and always eventually worked. Now one side only boots to a garbled screen. Both units turn on and go through the force feedback calibration where the wheels fully cycle side to side. The power supply has 5.10V at the power supply. But I'm not sure where on each board I need to verify 5.10V. IMG_9674.jpegIMG_9673.jpeg
Back
Top Bottom