Dragon's Lair Scoreboard Help!

QuartrArcade

Active member

Donor 2011
Joined
Dec 16, 2005
Messages
1,110
Reaction score
15
Location
Pennsylvania
Okay, I'm working on reprinting a small run of Dragon's Lair plexi scoreboards. Originally these were printed with a roughly 1/8" of clear around the speaker grills and the outside of the scoreboard.

We can print these black all the way through to the edge, but wasn't sure if this is a better way to go. Can somebody check their original plexi and see if you have clear edge around the speaker grill and border of the scoreboard?

Any thoughts on this one?

Anthony
 
My originals have the black all the way to the edge. There is also yellow text below each speaker cutout. I think the last repos only had text below one speaker. I can provide pictures of what I'm describing later tonight when I get home if your interested.
 
Thanks for posting those pictures jimk, and I had a look at mine and I see the difference as mine has the Starcom info vs. the Magicom info that yours has (which would explain the printing on both sides).

The repo I have also is using the Starcom print and is the same as my OEM plexi with the exception of the clear edge (the OEM is black right to the edge).

Cheers,
 
I didn't realize there was more than one version. I have two more orignal scoreboard plexi pieces and they have the Magicom info as well.
 
Thanks guys, I will print these to the edge this time. I can't do much about the other version, I'm using the original artwork and don't want to modify it, so this will be the same version as the last repro, printed to the edge.

Thanks again,
Anthony
 
Back
Top Bottom