SilverCoin
Active member
So my machine plays great.. except.. the NTSC board with the monitor isn't secured right and I believe it's causing the monitor to get a signal that cuts in and out. I can actually hold it and the picture is great and clear.
Best way to secure the board? right now some joker thought it was a good idea to drive a small wood screw in and strip what could have been easily screwed back in. So now it wobbles all around and any vibration kills the signal.
I tightened the connector on the card thinking that would help, it didn't.
Is there also a video cable replacement that isn't so stiff as the original? I am talking about the one that goes from the LD player to the monitor.
Thanks!
Best way to secure the board? right now some joker thought it was a good idea to drive a small wood screw in and strip what could have been easily screwed back in. So now it wobbles all around and any vibration kills the signal.
I tightened the connector on the card thinking that would help, it didn't.
Is there also a video cable replacement that isn't so stiff as the original? I am talking about the one that goes from the LD player to the monitor.
Thanks!