Double Dragon wiring to switching power supply

JonnyNeedles

Member

Donor 2011
Joined
Apr 27, 2011
Messages
209
Reaction score
1
Location
Madison Heights, Michigan
I have a question about wiring power to the coin door on my Double Dragon cabinet.
Tied into the bundle of wires that gets hooked to my switching power supply (Comes off the top right plug on the interface board), I have a plug with 3 wires heading up to the coin door.
Based on color (not good to do, I know), I would guess that black is ground, and yellow is 12v (please correct me if I'm wrong.)
Where does the green wire go?

I've attached a photo.
Thanks!
Jon
 

Attachments

  • coindoorharness.jpg
    coindoorharness.jpg
    95.9 KB · Views: 26
Back
Top Bottom