2-cents
New member
Not sure what the protocol is about posting a part 2 to an existing post. But here goes anyway. A while back I attempted to replace my dead deflect button switch on DOT thinking that it must be a problem with the LED. I switched it out being sure to wire it up exactly the way it was when I got it and still a no-go. The deflect button works but still no LED light up. Which leads me to believe something may not be wired correctly (although I'm so green I'm more than likely speaking out of my A$$). So I am attaching a little illo below of how the deflect button is wired up in my machine. If there is anyone out there who sees something wrong with the wire placement please let me know Or, if you're a DOT owner and are willing to take a pic of how yours is wired up that would be great too. The pics you see are from when I first opened up the stick.
Any and all help is much appreciated!
-J
Any and all help is much appreciated!
-J