donky kong glass question

john rainbo

Active member
Joined
Jun 2, 2008
Messages
1,314
Reaction score
7
Location
Illinois
Okay, I have a playchioce 10 single monitor arcade machine that started life as Donkey Kong. The glass on the front is missing. I have a question. One What is the dimension of this glass? And secondly, how do I adhere it to the machine? I have no idea how it would sit (and stay) in there? Can someone help me out here? I'm looking at buying a generic piece of smoked glass to cover this with, and don't know where to start.
 
The bezel sits in the groove of the small panel right above the cp.
You first put the top edge into the channel of the lower marquee bracket then the groove of the lower panel.
There should be a screen clamp on the inside that slides forward to lock the bezel in place.
You also need the metal strip at the bottom of the bezel,it is used to lift the bezel for removal.
There are repro bezels as well as nice used ones out there.
Here is a pic from the manual.
attachment.php
 

Attachments

  • IMG.jpg
    IMG.jpg
    77.9 KB · Views: 71
Back
Top Bottom