Donkey Kong with 20EZ and narrow screen.

robgest

New member
Joined
Feb 11, 2010
Messages
1,028
Reaction score
4
Location
Sturgis, Michigan
I just picked up this baby and everything is good but I have an issue to deal with. I have been searching on width problems but I can't seem to pin-point what I need to do. Any help would be great. The screen was very narrow and the picture just looked funny being so far from the edges. When I tryed to adjust it with the vertical size pot on the monitor it moved but not what I wanted. So I adjusted the VR2 on the board and it was moving in the right direction but at a point it just started to cut off the picture and get a bright line on the cut off edge.
Any help....
 

Attachments

  • DK help.jpg
    DK help.jpg
    93.9 KB · Views: 41
A cap kit is where I'd start. It doesn't always fix every problem, but of the 10 sanyo's I;ve done it's fixed it right up. Make sure to get the deluxe kit and do the audio board at the same time. - Barry
 
Back
Top Bottom