Donkey kong TKG3-UP in upright no sound

RyDawg

New member
Joined
Mar 10, 2009
Messages
362
Reaction score
0
Location
Monroe, Michigan
Ok - here is the deal.

I finally got a working boardset for my DKII kit. It is a 4 board coctail version of the game - but it wires right in to my upright fine. The DK II kit is installed and everything checks out on the diagnositcs.

The problem is - there is no sound.

The board was pulled from a working machine and played blind (with sonud). My DK has always had sound - even when my DKII kit was not working - and I know the sound is fine in the cabinet.

Looking at the manuals - I think maybe the sound connector is reversed? I tried reversing it - got nothing. Any suggestions as to what I could be missing?

Thanks!
 
Ok - I think I am missing a cable for the sound board to the power supply.

There is a power supply label marked "07 sound".
 
You probably don't have the power cable connected, the 2-bd set doesn't require it but the 4-bd set needs a seven pin power cable from the power supply in addition to the the audio output cable for the sound board.
Dick
 
Back
Top Bottom