Donkey Kong Sound issue with clip

suppabad82

New member
Joined
Jan 22, 2010
Messages
32
Reaction score
0
Location
Canada
Maybe you guys could help me out with this one, sanyo monitor,4 board dk, everything else is working but this low hum sound bah! i tryed it with just the monitor plugged in with speaker and still does it, so dont think its the dk board.

http://www.youtube.com/watch?v=k_6yK89D27g

thanks again guys!
 
Last edited:
Rebuild your sound amp for starters but a hum is very typical of these things. Even after a rebuild. Plenty of threads here on this very issue.
Lack of grounds can cause extra noise - ensure your AC plug has all 3 prongs on it and your cabinet has a ground from the monitor frame to a typical mounting point like a bolt on the ISO or a bolt on the power supply.
 
Last edited:
Back
Top Bottom