Donkey Kong Schematics Needed - 4 board version

postmortem01

Permanently Banned. Verified second account used f
Joined
Jan 27, 2011
Messages
270
Reaction score
0
Location
Newhall, California
Hello. I am in need of schematics for Donkey Kong TKG-2-up or TKG-3-up. I can't seem to find them anywhere online for download or purchase. Any help would be greatly appreciated.
 
I had no idea that the schematics were the same as Radar Scope. Did they reuse the Radar Scope boards and convert them to Donkey Kong?
 
Bumping an old thread. Does anyone have 4 board schematics for the TKG3 4 board stack?

I've looked at the Radarscope schematics, but they don't match up. There's more components installed on a TRS-03-SOU board than an TKG3-06-SOU board.
 
Bumping an old thread. Does anyone have 4 board schematics for the TKG3 4 board stack?

I've looked at the Radarscope schematics, but they don't match up. There's more components installed on a TRS-03-SOU board than an TKG3-06-SOU board.

I have to see if my Cabaret came with schematics. I take all the paperwork out and put in folders on my bookshelf.
 
I know this is a super old thread but it seems it never came to a conclusion. I am looking for the 4 board schematics as well and there seems to still be no source online for the PDF. I have the Operator's manual but I need the TKG3 4 board stack schematics. Anyone have it? Thanks
 
I know this is a super old thread but it seems it never came to a conclusion. I am looking for the 4 board schematics as well and there seems to still be no source online for the PDF. I have the Operator's manual but I need the TKG3 4 board stack schematics. Anyone have it? Thanks

What revision? I have the early ones, up to TKG3-06.
 
I don't think there many changes made between TKG3-06 and TKG3-07. I'm sure you could use the -06 schematics to do any repair work you needed to do.
 
PM JamBurglar, I believe he's got them.

I have them too, but I've changed computers a few times and don't remember where I stored them :)
 
Look at your boards and they will say, for example, "TKG3-06". The schematics varry depending on what board version you have. I haven't scanned everything yet so sending the whole set of schematics won't work.

Also, if you can't determine what revision you have you won't know which schematics apply to your boardset. You might consider sending the board off for somebody to repair.

Here's the table of contents for my schematics

https://dl.dropboxusercontent.com/u/83370632/DK TKG-2&3 Schematics (Contents).pdf
 
I have a dk machine with TKG3-06 4 board set. Could you point me to the schematics for it. It would help tremendously. Thanks
 
Back
Top Bottom