Donkey kong picture is upside down?

frytex

Member
Joined
Mar 25, 2008
Messages
534
Reaction score
1
Location
La Vernia, Texas
I just put another monitor in my Donkey Kong the picture is great and so is the sound but the Pic is upside down, How do I fix that?
 
what type of monitor is the new one? Nintendo boards have an inverted signal IIRC so you might need an inverter

The inverted signal only refers to the colors, and not the picture orientation.

Check to see if the yoke wires have been flipped.
 
You most likely need to swap the yoke wires to flip the picture.
It would be useful to post a pic or the name of the monitor.
 
I just put another monitor in my Donkey Kong the picture is great and so is the sound but the Pic is upside down, How do I fix that?

Wow... answering this question for about the hundredth time. Perhaps of Dokert read my posts, he's know the answer.

There's a bank of jumper wires labelled J2 up near the P9 power connectors. Move the jumper from M to S or vice-versa.
 
Let me check to see what the OP asked.

I just put another monitor in my Donkey Kong the picture is great and so is the sound but the Pic is upside down, How do I fix that?

After checking, it would seem that the only thing that changed was the monitor. It would be great if there was a pic of the chassis to check, but there isn't.

Check to see if the yoke wires have been flipped.

If the yoke wires have been checked, and they are in the correct original position you will have to change the jumper on the boardset.

Hopefully this clarifies for those who obviously can't read and / or have the reading comprehension of a small child.
 
I gave him that monitor, and tested it working in a SMB first. Waiting for him to call me so I can help him out...
 
Back
Top Bottom