Donkey Kong PCB convert to DK3

Darryl1970

Member

Donor 3 years: 2013-2014, 2016
Joined
Jul 25, 2013
Messages
314
Reaction score
1
Location
Canton, Ohio
I have a spare DK board, in need of repair. I also have an empty slot in my Vector-Labs switcher. Although I do not really like DK3, I got to thinking that it would complete the DK series to add DK3.

I know that Double-DK has sound issues. I have read that the boards have discreet sound on board. If this is the case, I would assume DK3 would not operate properly on a DK board, even if everything else is equal. I want to know if I understand this correctly, in case it would be possible to fully run DK3 on a DK board.

If I burn DK3 EPROMs (after I fix the board), would it be plug and play. Anybody out there know the ins and outs of this?
 
AFAIK, DK3 uses a completely different CPU board from DK and DKJr. (Jr is unique too; especially for sound circuitry)
 
Back
Top Bottom