donkey kong missing wire harness question

DK1

New member
Joined
Jun 3, 2009
Messages
259
Reaction score
3
Location
Hilversum, Hillywood, Netherlands
A couple of months ago i bought a donkey kong cabinet. These cabinets are quite rare over here (the netherlands) so i'm very happy with it.
You can check the road trip report over here: http://www.dragonslairfans.com/smfor/index.php?topic=1930.msg21684#msg21684

The state of the cab is reasonable but still needs lot's of work. I've already bought some flat nintendo t-molding and somebody is fixing the (4 board) pcb right now.
After that's done i'll have to give the monitor a new cap kit and maybe a some fresh paint.

There is one more problem, the cabinet is missing part of the wire harness.
It's the part going from the power pc board (9pcpu, 7psou, 1opclk) to the pcb, as i mentioned it's the 4 board version. So the question is:

Do you guys know where i could get the missing wires?

imag3033.jpg
 
Last edited:
You don't have many options.
You could post in the F.S. section and hope someone has them.
You could make them up yourself.
You might PM Dokert and he might have the parts on hand to make one up for you.
I know he is doing another run of harnesses but those use the edge connector and the 4 board set has no edge connector.
 
I "upgraded" my 4-board DK to a 2-board last week. I have the entire 4-board harness, all PSU connections, board connections, and even the CP harness connections.

I'm not parting any of it out though, I'm keeping it complete. just saying. let me know what you think.
 
I figured Dok would be able to help you out.

Any chance you want to flip the 9 and 10 pin DK power cables you just bought (assuming you bought them). Mine were hacked for a switching power supply and I'm want to take my DK back all original.
 
Any chance you want to flip the 9 and 10 pin DK power cables you just bought (assuming you bought them). Mine were hacked for a switching power supply and I'm want to take my DK back all original.

I don't have any spare 9 or 10 pin wires.
I only have a spare 7 pin wire for a 4 board set.
 
I don't have any spare 9 or 10 pin wires.
I only have a spare 7 pin wire for a 4 board set.

Doh! That's the only one (of the 3 power wires) I've got too. I was hoping you had scored those cabaret parts and didn't need the power wires. I'll find them eventually! Thanks man.
 
Back
Top Bottom