donkey kong little jumpy

paul400

Well-known member
Joined
Nov 8, 2010
Messages
2,416
Reaction score
219
Location
Hixson, Tennessee
my DK jumps alittle when you start it up but after its warmed up its a nice stable picture. is this a Characteristic of sanyo20"s ofr somthing i should look into? recapped
 
I don't know if it's typical or not. However, mine has foldover on the left side for about the first 3 minutes it's on. Then the picture looks great. I'm sure it will need a cap kit at some point, but I'm fine with it the way it is for now.
 
I don't know if it's typical or not. However, mine has foldover on the left side for about the first 3 minutes it's on. Then the picture looks great. I'm sure it will need a cap kit at some point, but I'm fine with it the way it is for now.

mine was warped and folded over till i did a cap kit
 
It's usually pots. Either the 2 on the pcb or 1 on the monitor. When it's acting up you can turn the pots and stop it. The 2 on the PCB go bad often. Bob Roberts has replacements. - Barry
 
It's usually pots. Either the 2 on the pcb or 1 on the monitor. When it's acting up you can turn the pots and stop it. The 2 on the PCB go bad often. Bob Roberts has replacements. - Barry

i thought it might be a pot,funny thing is about minute after the game is turned on the picture is compltely stable.i will swap out my dk jr pcb to rule those pots out first.
 
Back
Top Bottom