Donkey Kong Junior Side Art Placement ...

Bump ...

Guys I am in need of some serious help ... I am trying to apply my side art and I'm not exactly certain what to do ... First I tried to apply the side art by matching the location of the bolts in the images below ... I use a pen light from the inside of the cabinet to match the locations ...

http://www.arcaderestoration.com/graphics/donkeykongjr/dkjrrightbig.jpg
http://www.arcaderestoration.com/graphics/donkeykongjr/dkjrleftbig.jpg

The side art in the pictures above is original while obviously mine is repro ...

It seemed ok but next I tried aligning the side art using jsquared's dimensions below ... when I did this the bolt holes no longer matched the images above, but the art seemed to be better positioned on the cab ...

so what should I do? ... use jsquared's dimensions or align via the bolt holes? ... Also, could someone please validate jsquared's dimensions? ... any help is appreciated ...

the tip of DK's head is 1-7/8" from top of cabinet, including the T-molding. Then facing game (like you would play it) on the left side measuring off back, because thats your only straight line...measure 3-1/4" from back of cab. to outside of sticker at the border (with the bird). And then the right side Off the back of the cab. is 25-1/4" to the outside of the border( Bird side) Hope this helps
 
Go by jsquared's, the reason your bolt holes are off is because at the factory they just slapped this shit on. Just line it up how it looks the best, like Jsquared did.
 
Back
Top Bottom