Donkey Kong harness routing

joeyoravec

Member
Joined
May 3, 2011
Messages
457
Reaction score
16
Location
Livonia, Michigan
I pulled everything out for restoration but lost my photos. Can somebody please snap pictures that show the overview of how the original harness is routed around the interior of the cabinet like:

- How the wires are dressed coming off the monitor
- From the power brick up to the PCB area
- Around the PCB forward to the control panel area
- On the right side and cutting across the bottom
- Which points are grounded with that green wire

Thanks
 
Here's one I just happened to have on hand. PM me for a full resolution picture.
 

Attachments

  • iOfOXoi3mxaOm.jpg
    iOfOXoi3mxaOm.jpg
    99.7 KB · Views: 38
It looks like parts may have come in and out on that cabinet before. Your monitor power isn't secured on the right hand side and the other stuff doesn't seem to be secured using the normal wire holders.
 
Sorry, thats not actually a picture of my machine, just one I had stored. Mine has been hacked around with in the past, so that would be a good example to follow either.

A clean picture of a properly organized Nintendo cabinet (DK or otherwise) would be nice to have. Surely somebody on here has one...
 
Back
Top Bottom