Donkey Kong Graphics are Funky

aboy1411

New member
Joined
Apr 7, 2010
Messages
213
Reaction score
2
Location
corpus christi, Texas
I did a cap kit almost two years ago and that fixed the issues I was having. I was new to the hobby at the time and when I reseated my chips I put two of them in backwards lol. Obviously after that I had more problems. The chips that were visibly burnt I replaced. When I fired it back up I have the problems that I have now.

The game is 100% playable. Sound, buttons, etc. work fine. Its just the graphics are a little screwy. I attached some pics of the issue.

I want to get it fixed and my DK will be done for the most part.

Thanks for looking!
 

Attachments

  • IMG_2644.jpg
    IMG_2644.jpg
    97.9 KB · Views: 33
  • IMG_2650.jpg
    IMG_2650.jpg
    99.1 KB · Views: 23
  • IMG_2646.jpg
    IMG_2646.jpg
    113.1 KB · Views: 17
hmm

pull the chips out and look for bent legs. Go through every one of them. If all legs are ok. Verify each of the chips with a programmer against good eprom files. One may be bad.
 
Back
Top Bottom