Donkey Kong 5/8" off center white T-molding - who has this?

barakawins

Well-known member

Donor 2023
Joined
Nov 14, 2004
Messages
2,708
Reaction score
240
Location
Woodcliff Lake, New Jersey
Donkey Kong 5/8" off center white T-molding - who has this?

Donkey Kong 5/8" off center white T-molding - who has this? I can't seem to find the correct T molding for the plywood cabinet.
 
I too have used the off center t-molding from chomping quarters. It worked for my situation, however, I have to agree with ElectricDreamz. It is not a true flat and does not match original. The true flat they make for the plywood is great stuff and I have that on my other Nintendo cabs. But this off center molding is not that great of a match to original.

With that said I'm not sure there is another company selling an off center true flat molding. So this may be your only choice. Or stick to the original you may already have on your machine. Hope that helps!

William
 
With that said I'm not sure there is another company selling an off center true flat molding. So this may be your only choice. Or stick to the original you may already have on your machine. Hope that helps!

William

Third option would be to fill in your offset groove and recut a centered groove.
 
I have a DK cabinet with off-set t-molding.

The offerings out there are so bad that I'm just going to bondo the slot and re-cut it centered.
 
Last edited:
Back
Top Bottom