Donkey Kong 4-Board Flipscreen hack?

ballytablewiz

Well-known member
Joined
Jun 11, 2010
Messages
2,246
Reaction score
140
Location
Arkham, Massachusetts
Ok, so I have a 4-Board Donkey Kong (TKG3) and a Konami-wired Nintendo cabaret. Currently the cabaret is sporting Mega Zone, which I suspect required the previous op to swap the yoke wires, because when I hook up the DK board, the video is upside-down. Obviously I am aware of the dipswitch for cocktail or upright, and it is in the correct position (besides the fact that the orientation is present on P1's screen).

The question here is : Is there a flipscreen hack for the 4-Board DK?

I've seen the tech about it over at Braze's site, but it all pertains to the 2-Board stack, and the 4-board either does not have the jumpers pictured, or they are located elsewhere and labeled differently.
Anyone aware of, and/or achieved a flipscreen hack on 4-Board DK? I really don't want to swap yoke wires everytime I want to switch between Konami and Nintendo. HALP!!!
 
I've got the same problem on my Gaplus cab...been using it for my Crazy Kong boards, and it's upside down. I've been toying with the idea to install a pair of DPDT switches on the yoke wires so I can flip each direction. I'm just not sure if there's enough wire to do it without splicing in extra wire, and be able to mount the switches somewhere so they're not dangling.
 
Back
Top Bottom