You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
Museum of the Game® & International Arcade Museum® Forums
Good evening everyone,
I have a Dk3 that has been working fine for years. The power supply went out and I replaced it with a happ switcher. The voltages are currently measuring 5.05 at the edge connector on the board. The only voltage I'm not getting from the original is the 24v which was for the coin counter according to the internet.
Above is a video of what it looks like currently. The controls all work and it seems to play fine but its a mess as you can see in the video. Ive taken the chips out and cleaned them and replaced the battery holder and batteries for good measure. Still glithy graphics