does this need a Isolation transformer newer chasis old tube.

pacman71

Well-known member
Joined
Aug 17, 2007
Messages
2,169
Reaction score
193
Location
Iowa
does this need a Isolation transformer newer chasis old tube.

Okay it is an old GO7 tube with a newer chasis. I am still a newb with electronics, and don't want to make a mistake.

I am turning this old game into a jamma machine. If I can take the transformers out and just wire direct... or though a fuse first I'd like to. There is a lot of crap in the bottom of this cabinet that is likely to develop problems or may have caused the original boards to fail. It is a mrs. pac cocktail.
DSC01457.jpg




DSC01459.jpg


DSC01456.jpg



I also don't want to screw anything up... can anyone tell me for sure on this matter.

:confused:
 
Oops I put this in the wrong category... Is there anyway to move it?
 
The Wei-ya model 820H is used as a replacement chassis for the Electrohome G07.

It definitely NEEDS an isolation transformer.
 
whenever im unsure i just use a iso anyways...

even if the monitor your putting in doesent need a iso, someday a replacement monitor you want to put in might, so again like i said i just put one in most of the time....

id rather be safe than sorry....
 
Back
Top Bottom