Does anyone rebuild atari boards?

jmack

New member
Joined
Nov 14, 2010
Messages
113
Reaction score
0
Location
Arizona
It looks like the solenoid driver circuit is bad on my atari superman pin. Does anyone rebuild those boards? Thanks
 
I've seen a place called Nu Atari, but don't know of anyone that's used them.

I did the repairs on my machine the first time around, but had though about using them before I finally figured everything out and got it going.

-JM
 
The go-to guy for Atari boards is John Robertson out of Canada. His website is (whoops had the wrong one, follow links below in next post). I know he does get backlogged a lot though, so not sure what his turnaround time is these days.

I've done them in the past but am not really set up them as nicely as necessary.

-Hans
 
Last edited:
thats the wrong webiste for john robertson. he's at flippers.com, or google john's jukes. PS- hi hans, hope all is well in the new location.

mike from sayville
 
Mike;

Good catch there, don't know where I got that link from LOL.

Going well over here, finally set up and running again in full swing. How's things over in Sayville?

-Hans
 
Thanks everyone. I found John Robertson to be very helpful.
 
Back
Top Bottom