Does anyone have??

LittleTimmy

New member
Joined
Feb 6, 2010
Messages
37
Reaction score
0
Location
Wisconsin
Sorry if this is the wrong section. I know this subject has been beaten TO DEATH,but ..
I have a WG k7000 chassis. I wanted to do the C36 modification to the board, butI don't have the extra holes to do this. I need C36 and C69.Yes, I e-mailed Bob,and he is out of the C36, and does not have the C69. BTW...C36 I pulled out was a 2 leg cap, and
reads:.0036I
PDS1600V
9120

C69: .0061G
PDS1600V
9119

C69 Blew up, so I'm also going to change out the HOT and regulator again!

Does anyone have these or know where I can get them from?Thanks.
 
if its a 19 incher i have several donor chassis some missing stuff some complete and either repairable or working truly untested so i dont knoe for sure...

lmk if you want one...

at this point i think your better off fixing up another chassis versus hunting all the gremilins down on this bastage...
 
.0036I
PDS1600V
9120

3600pF 1600v Polypropylene


.0061G
PDS1600V
9119

6100pF 1600v Polypropylene


both can be ordered new from Mouser, but they have about a 33-week wait for them to be in stock....
 
Thanks for all the replies.It's a 25 incher. My confidence was up because I fixed 2 Electrohomes and a Sanyo. Then my buddie gets a T2 game that the monitor doesn't work. ME AND MY BIG MOUTH! I'm gonna give this chassis one more shot . If not, I will definately let you know cadillacman. Thanks again. You guys are very knowledgeable and helpful!
 
Back
Top Bottom